jkjkelvin 2006-8-22 11:52
邊隻printer又平又好用?
唔需要scan function, 只係普通print out
可以print A3 size, 相紙..
thx~
potatochip 2006-8-24 23:04
If you don't need to print on A3 size paper and color is not important, you should buy laser printer. Total cost of ownership for a year will be much lower than jet.
blizzardyzc 2006-8-25 18:07
espon is good, i think
naxo 2006-8-31 02:44
最緊要睇埋D墨既價錢同埋容量大唔大, 有好多部機都好平, 但D墨加加埋埋就好貴.
另外, epson 就唔知點解易塞墨頭, 最好至少一星期開一開部機等佢自動洗一洗墨頭.
busman 2006-8-31 22:46
我做幾間公司都是用 HP , 我覺得幾耐用, 而且算是容易維修
jkjkelvin 2006-9-1 10:11
己經買咗
espon cx4700
thank you!~:bow::bow:
Jeff9394 2006-9-1 14:00
咁 快 arm arm 睇 到 重 想 叫 你 唔 好 買 Espon 買 HP tim
咁 你 記 住 日 日 都 要 print 下 野 唔 係 個 噴 頭 好 易 Jam :bow:
i_love_you_chi 2006-9-2 17:20
hg 1410
rtsang88 2006-9-3 00:28
I prefer HP
HP laserjet 1018, new model
print up to 12 pages per min
on sale for CAN$79.99 at BestBuy
ray195719572 2006-9-3 16:02
Hp is not bad i hope
wwjjyy1204 2006-9-3 18:18
是但买部先,用完D原装的先.
跟G改装做供默系统,,,甘样平好多...悭番好多钱.
jkjkelvin 2006-9-6 12:55
[quote]原帖由 [i]jkjkelvin[/i] 於 2006-9-1 10:11 AM 發表
己經買咗
espon cx4700
thank you!~:bow::bow: [/quote]
thx:bow::bow:
uknowzip 2006-9-11 01:36
These days HP is cutting corner, but it's still ok. I've used at least over 20 different models (inkjet, designjet, laserjet, color laserjet, etc.). The biggest factor is the cost of the cartridge. It'll cost you an arm and a leg.
hintel79 2006-9-12 01:43
espon is good , me also use this