私家車茶色玻璃度數放寬

終於落實，司機兩則要70%透明，後座兩邊放寬至44%透明

VERRRRRRRY GOOD!!!

Yes, 1/5/08 開始生效。
詳情可睇下：運輸署對車輛玻璃規定作出的最新修訂

咁就真係大細超啦！係運輸處發信比各車行代理架！

查實44%即係點樣?
有無post D樣辦睇下

其十原庒水貨車AS3 GLASS係幾多透光度?

Safety glazing materials in motor vehicles shall comply with the applicable requirements listed in this section.

Test Number

1.  Luminous transmittance
2.  Humidity test
3.  Boil test
4.  Bake test
5.  Impact, ball, 10 ft (3.05m)
6.  Light stability
7.  Fracture Test
8.  Impact, shot bag, 8ft (2.44m)
9.  Impact, dart, 30ft (9.14m)
10. Impact, dart
11. Impact dart, 10 ft. (3.05m)
12. Impact, ball, 30 ft. (9.14m)
13. Impact, ball
14. Deviation and distortion
18. Abrasion resistance
26. Penetration resistance
28. Temperature Change
29. Abrasion resistance
30. Abrasion resistance

AS1 – Safety Glazing Material for Use Anywhere in Motor Vehicle. Safety glazing materials that comply with the following may be used anywhere in a motor vehicle:

         1. 1, 2, 3, 4, 9, 12, 15, 16, and 26;

            OR
         2. Multiple glazed units, Class 1, the individual component units of which comply with the set of tests designated in (a), and the assembled unit of which complies with Tests 1, 2, and 15;


            OR
         3. Multiple glazed units, Class 2, that comply with Tests 1, 2, 3, 5, 9, 12, 14, 15, 18, and 26, 28, 33, and 34 may be used in windshields.

AS2 – Safety Glazing Material for Use Anywhere in Motor Vehicle Except Windshields. Safety glazing materials that comply with the following may be used anywhere in a motor vehicle except windshields:

         1. Tests 1, 2, 3, 4, 9, 12 and 18;

            OR
         2. Tests 1, 2, 6, 7, 8 and 18; or
         3. Multiple glazed units, Class 1, the individual component units of which comply with one or another of the sets of tests immediately above designated; and the assembled unit of which complies with Tests 1 and 2;

            OR
         4. Multiple glazed units, Class 2, that comply with Tests 1, 2, 3, 5, 9, 12, 14 and 18; or Tests 1, 2, 3, 5, 6, 7, 8, 14, and 18.



AS3 – Safety Glazing Material for Use Anywhere in Motor Vehicle Except Windshields and Certain Specified Locations. Safety glazing materials that comply with the tests listed in (a), (b), (c), or (d) below may be used anywhere in a motor vehicle except in windshields and in the following locations at levels requisite for driving visibility.

   1. Buses, Trucks, and Truck Tractors. Glazing of windows to the immediate right and left of the driver and in rearmost window if the latter is used for driving visibility.
   2. Passenger Automobiles and Taxicabs. Glazing of all windows, including rear window, all interior partitions, and all apertures created for window purposes. a) Tests 1, 3, 4, 9, 12 and 18;

      OR

       1. Test 1, 6, 7, 8 and 18;

          OR
       2. Multiple glazed units, Class 1, the individual component units of which comply with one or another of the sets of tests designated in (a) and (b), and the assembled unit of which complies with Test 1;

          OR
       3. Multiple glazed units, Class 2, that comply with Tests 1, 3, 5, 9, 12, 14 and 18; or Tests 1, 3, 5, 6, 7, 8, 14, and 18.;
       4. Where Test 18 is specified in (a), (b), (c), and (d) above, it shall be waived as not applicable for obscure safety glazing, either textured or with a translucent coating or interlayer, in applications such as rest rooms of buses, trailers, campers, or motor homes.

啱啱照舊例tin左玻璃

真好!!降子一來開車就安全多囉!!!!