hong kong 有幾多 公司 專請 人 去畫 AutoCAD ??

Many, mostly architecture companies and engineering companies, as well as a few design companies.

thanks , i see in MTR "jiu-jik" , have school teaching this software , only $1,750.

實際應用都係要自己努力嘗試...

understand.

I self learned this software many many years ago and used this to cheat for a summer job as a draftsman
Important is not to learn the softwear, but to apply it in the industry.

引用:

原帖由 verjai 於 2007-2-8 16:52 發表
I self learned this software many many years ago and used this to cheat for a summer job as a draftsman
Important is not to learn the softwear, but to apply it in the industry.

大約 有幾多 salary , u can PM me , thanks

約 有幾多 salary , u can PM me , thanks

好難講喎~~~
睇你有咩經驗...你識autocad又識識幾多???你仲識唔識其他software???(如ps/ai/fh/3d or office)...ac多數都係做室內設計..場地..or產品設計多....但係你識ac時(如係室內設計...應該識埋d 1/2點透視圖..hand draw等....你就咁講ac...好難答....

約 有幾多 salary , u can PM me , thanks

业专于精，很多地方用的作，呵呵！！！

同意11楼说法，只要技术精，不怕没有用武之地。

I think AutoCAD is popular in Building Consultant firm because it has to prepare layout plan for addition and alteration works.

挺实用的，毕竟有市场才能长期存在，包括机械设计，工业设计，建筑等等斗需要使用到CAD或者基于CAD平台的软件

autocad 既 draftsman, 我唔會比多過6500!
因為大陸太平, 識pro-e or solidwork既draftsman, 3000就得!
所以, 我個人覺得, 你學software固然重要,但最重要係對
果一個行業有認識, 例如你見玩具公司, 咁要有玩具安全standard
or 對production 既認 識, 如果見電氣工程公司, 就要有安裝電氣安全standard
既認識.

註 : Draftsman唔同engineer, 根本唔係一個吃香既職位!

純個人意見, 有唔arm聽, 請見諒!

Billy

我都在学习Ｄ个　 好象需要作品的