香港 Xocat Forum 討論區 - Powered by Discuz! Board

標題: [疑難] 邊隻printer又平又好用? [打印本頁]

作者: jkjkelvin 時間: 2006-8-22 11:52 標題: 邊隻printer又平又好用?

唔需要scan function, 只係普通print out
可以print A3 size, 相紙..

thx~

作者: potatochip 時間: 2006-8-24 23:04

If you don't need to print on A3 size paper and color is not important, you should buy laser printer. Total cost of ownership for a year will be much lower than jet.

作者: blizzardyzc 時間: 2006-8-25 18:07

espon is good, i think

作者: naxo 時間: 2006-8-31 02:44

最緊要睇埋D墨既價錢同埋容量大唔大, 有好多部機都好平, 但D墨加加埋埋就好貴.
另外, epson 就唔知點解易塞墨頭, 最好至少一星期開一開部機等佢自動洗一洗墨頭.

作者: busman 時間: 2006-8-31 22:46

我做幾間公司都是用 HP , 我覺得幾耐用, 而且算是容易維修

作者: jkjkelvin 時間: 2006-9-1 10:11

己經買咗

espon cx4700

thank you!~

作者: Jeff9394 時間: 2006-9-1 14:00

咁快 arm arm 睇到重想叫你唔好買 Espon 買 HP tim
咁你記住日日都要 print 下野唔係個噴頭好易 Jam

作者: i_love_you_chi 時間: 2006-9-2 17:20

hg 1410

作者: rtsang88 時間: 2006-9-3 00:28

I prefer HP
HP laserjet 1018, new model
print up to 12 pages per min
on sale for CAN$79.99 at BestBuy

作者: ray195719572 時間: 2006-9-3 16:02

Hp is not bad i hope

作者: wwjjyy1204 時間: 2006-9-3 18:18 標題: 是但买部先,用完D原装的先.

跟G改装做供默系统,,,甘样平好多...悭番好多钱.

作者: jkjkelvin 時間: 2006-9-6 12:55

引用:

原帖由 jkjkelvin 於 2006-9-1 10:11 AM 發表
己經買咗

espon cx4700

thank you!~

thx

作者: uknowzip 時間: 2006-9-11 01:36

These days HP is cutting corner, but it's still ok. I've used at least over 20 different models (inkjet, designjet, laserjet, color laserjet, etc.). The biggest factor is the cost of the cartridge. It'll cost you an arm and a leg.

作者: hintel79 時間: 2006-9-12 01:43

espon is good , me also use this

作者: 007sam 時間: 2006-9-12 21:00

canon~~

作者: beelee 時間: 2006-9-16 01:04

我的printer是Canon,到目前仍好用.

作者: apple704 時間: 2006-9-17 02:42

我用緊HP, 唔錯ga~

歡迎光臨香港 Xocat Forum 討論區 (http://p.xocat.com/p/)