引用:

原帖由 aloharicnsa 於 2006-9-8 03:25 AM 發表
I left HK 20+ years ago and moved to Hawaii (therefore the call sign Aloha Ric), now I am in California.

其實見到兄台個網名小弟已經估你有可能住 Hawaii 個便啦，講開，我朋友個朋友都係做 gunsmith in Kaunakakai，可能你都認識佢。

兄台而家搬左去 California 豈不是要用個便o既 “Political Correct 10 rd magazine” ？Oh God！！

引用:

I always laugh at the HK Police (regular PC) because of their low power 38 special. Most of the bad guys are carrying AK or other high cap pistol. A model 10 - 6 shooter just no gonna to work!

而家算好左啦，因為 80 年代中經已用 158 grain +P Jacket Hollow Point 子彈黎取代以前用左好多年o既 Lead Round Nose，仲配發多一個 speed loader 同六粒 spare ammo！

BTW, the bad guys usually are using those cheap Chinese Type 51 or 54 pistol (copy of Russian Tokarov 7.62X25mm TT-33 auto pistol), high cap auto was not always found...... we are not watching "Miami Vice" here in HK!

引用:

By the way, here is a Beretta Neo 22 that I bought for me GF – good for pinking! I installed a red-dot for easier targeting as well. It looks more like my StarWar phaser!

平時我唔會貼 .22LR 細口徑手槍相，見你講 pinking，o岩o岩見到有幾張相，順便貼上黎啦！

Ruger MKII & MKIII, .22LR

[ 本帖最後由 SIG 於 2006-9-13 12:06 PM 編輯 ]

Kimber Compact 1911, .45ACP

Kimber 1911, .45ACP

Wilson Combat CQB Model, .45ACP

Nighthawk Compact Carry 1911, .45ACP

Nighthawk 1911, .45ACP

SIG Sauer P245, .45ACP

引用:

原帖由 aloharicnsa 於 2006-9-13 12:33 PM 發表
Man - now I need to look for a black/blue one!?!    See how long it will take me this time?

Brother aloharicnsa,

Well, if you DEFINITELY want to get one for collection, look for an original blue finish is the only choice, otherwise just let go.

引用:

原帖由 aloharicnsa 於 2006-9-13 12:36 PM 發表
This is one my SA Mil-Spec (1911 – 45ACP) that I converted to use in my open class IPSC. Somehow the scope mount did not work out – ejecting shell case sometime (or at the worst time) get stuck and it eats up my shot time.

The usual upgrade on the 1911: trigger to 3.5 lb, MSH, hammer, beavertail and FLGR (I like heavy gun).  

OH....... is your Springfield really a Mil-Spec??!! seeing from the photo It looks like a stainless steel to me. (In which I had a stainless model before)

Very common problem problem with the 1911, ejecting case hitting at the scope mount and jam the pistol!

Have you ever try to file a little bit on the ejector to change the ejecting angle? Or, get a single side scope mount to solve this problem, you should be able to find many in Brownells, right?

Just curious, you really using this pistol to shoot in Open Division?!!!!! A single stack non-compensated 45, against those hi-cap boys with full house ports and whatever that shoot 38 Super or 9X23mm!!!!! I give you my highest respect pal!!!

BTW, I have installed a SV Titaium sear spring into my Wilson Combat, it reduce the trigger pull from 3.5 lb down to 1 3/4 lb without hammer follow, you should try one.

Before I used to compete in Standard Division but in recent years I play in Production Division, just feel I can have more fun to shoot a service grade pistol like Glock or SIG than a custom bulit one.

See the Spring Armoury Mil-Spec 1911A1 pistol.

[ 本帖最後由 SIG 於 2006-9-14 06:56 PM 編輯 ]

Colt Mark IV Series 70, .45ACP

Colt 1911 Compact Model, .45ACP

Glock 17 & SIG Sauer P226, 9X19mm

引用:

原帖由 aloharicnsa 於 2006-9-15 02:20 AM 發表
The base Mil-Spec is not a fun 1911 to shoot – hammer bit, no memory beavertail, shitty trigger, really, really bad sight … etc. Trust me – I have done plenty of upgrade on it....

Certainly, remember lots of professional gunsmiths in USA mentioned, "You can NEVER get a 1911 pistol works reliably out of the box......

Talking about beavertail grip safety, I have not a chance getting hammer bite even shooting hot 45 +P rounds, cos my hand don't have too much muscle but I'd saw some of my friends with a bleeding hand after shooting an un-modified 1911.

引用:

Yes I tried open/single stack with this – but obviously I failed miserably. Apart from the “jamming” problem, my pistol is total “out-gunned”. Some the pistol in open division cost close to my car (over $5-10K!).  Next time I will post my other 1911 that I used for single stack.

Oh yeah, those hot shots are using bloody expensive full house race gear, unless you have a similar pistol otherwise that's no way to compete with them even your're a great shooter like say, Jerry Barnhart!

Expecting to see the picture of your toy which you use in Single Stack Division!

引用:

1 ¾ trigger? That’s crazy dude! You need to be careful with that kind of trigger… or better yet, let me know ahead when you have the pistol with you and I will be sure I am go the other way!

Don't worry pal, it is SAFE!!! I let my friends test fired the pistol after installed the Titanium sear spring.

Humm....... you should come to HK and shoot a match and see it, and we should shoot in the same squard....... yes, my piece is safe, very SAFE!

See my ex....... the Glock 21, until now I still feel it is the softest shooting 45 pistol so far, however the grip is way too large for my not very large hand, I have to shift a little bit to release the mag during reloading, and wasting some time for doing that!

Glock 21, .45ACP

Les Baer Custom Thunder Ranch pistol, .45ACP

Les Baer Custom Thunder Ranch pistol, .45ACP

Les Baer Custom Thunder Ranch pistol, .45ACP

SIG Sauer P220 Stainless, .45ACP.

SIG Sauer P220ST, .45ACP.

Glock 33, .357SIG

Walther P99, 9X19mm

Glock 26, 9X19mm

最新消息，二次大戰退役上校，被稱為現代實用射擊之父，"Father of Modern Practical Shooting", Jeff Cooper 先生幾日前於睡眠中逝世，願佢係天堂得到安息！

再見槍神！Farewell Mr. Cooper and rest in peace!!!

引用:

原帖由 aloharicnsa 於 2006-9-13 02:29 AM 發表
I think that 9 mm as sidearm may be “weak” (I should not say that – since the US force had standard issue 92FS in the 80s) and there is always the discussion of “stopping power” of the 45.   

It is why most of the police department in US have moved to Glock 22 (40) or Sig 226/229 (40) (only if the department can afford Sig!). I know a few local Sheriff/CHP carrys 1911/45 ACP instead. They wear a level 2 amor as well (which is not as heavy as I initially thought).

Brother aloharicnsa,

好對唔住，原來一直睇漏左閣下呢個 post，而家答左你先。

其實大約七年前香港 SDU 開始測試，為挑選新型配槍時候，除左 9mm Glock17 之外亦同時有 .40S&W 口徑o既 Glock22，最後未有採用 .40S&W 而照樣用翻一直用開o既 9mm Para，只因為某班成日坐辦公室嘆冷氣高層，居然要求由 Glock 廠方向"香港正苦" 提供，由美國特警單位發出，正式證明 .40S&W stopping power 係大過 9X19mm，同有更大 ballistic wound，咁樣先至會考慮轉用新口徑子彈！

呢方面試問外國執法部門點會睬你，你想知咪去睇下 Ayoob Files 囉！

於是乎當最後決定採購 Glock 黎代替 Browning Hi-Power作為 SDU 隊員配槍時候，就仍然繼續用 9mm Para 子彈，於是就買 Glock17而唔係 Glock22 喇！

無他o既，係班用屁股思考o既高層怕選錯子彈口徑，有事上黎唔想孭鑊而已！

至於閣下所講 stopping power 方面，小弟都同意，但就始終認為 the winning factor is shot placement + quality (hollow point) ammo！

雖然係香港能夠買到o既 hollow point 子彈種類唔係太多，但都算得上係 OK，連美國已經 ban 左o既 Winchester Black Talon 呢便都仍然仲有少數供應。

引用:

原帖由 aloharicnsa 於 2006-9-23 03:28 AM 發表
Here is what I used for my competition – IDPA, ISPC and tactical match (something different) –
SA 1911 Service - 9 mm – did the usual upgrade – trigger, hammer, beavertail… etc. <I think that I upgraded all my 1911 the same path>. I know, I know – it is only a 9 mm… and I got less point on scoring (compare to using 45)…

Why don't you buy a 45 caliber instead of that 9mm in 1911?

Novak 現在都生產 fiber optic sight，唔睇你 d 相都唔知添！我對 fiber optics sight興趣不大，反而鍾意 Tritium night sight，除左 SIG P226冇裝用原廠 sight 外，所有 Glock 同 H&K USP 都裝左 Meprolight，MMC 或者係Richard Hienie 既 Straight 8 night sight。

引用:

Due to rules and regulations on IDPA/IPSC, I am not allowed to install any “ghost ring” type sighting – which I did installed on my other Mil-spec.

I had installed one set of "ghost ring" sight on my Glock, however don't like it too much so I took it off later.

引用:

I can do ½ inches group, 10-15 yards free hand. Every time I did that – I have that grin on my face after I collect my target paper.

I didn't shoot tight grouping so much, but I'd try to shoot a smiling face on an IPSC target, certainly the distance is not far as Mel Gibson done in the movie "Lethal Weapon", just 10M only.

[ 本帖最後由 SIG 於 2006-9-27 07:32 AM 編輯 ]