Hope you enjoy shooting your new purchase Glock buddy!

Pity in HK we have to follow the international IPSC rule so Glock 34 won’t be allowed to use in Production Division.

As a certified Glock armorer, I just give you some suggestion for your new piece:-

1) If you’re going to change for a set of Tritinum sight, please remember DO NOT buy the Glock factory night sight, it is really crap!!!

2) Not sure about the USPSA rule whether you could change internal parts for you Glock 34, I know a way you can reduce the trigger pull weight (though it has already got a 3.5lb connector).

3) Avoid using ammunition with hard primers (e.g. PMC), sometimes it will cause you a light strike and misfire.

4) NEVER use lead bullet on Glock as the lead will starts build up in the polygonal rifling within 100 rds.

Lastly, you can change the firing pin spring cup to the "Maritime" spring cup and fire the pistol underwater!

I look forward for you Glock 34 test report!

[ 本帖最後由 SIG 於 2006-11-23 10:37 AM 編輯 ]

Glock 32, 口徑 .357 SIG

Pictures of Glock 17T that I took several years ago, 口徑 9mm FX

Glock 17 and Glock 17T

9mm FX ammunition for colour marking, force on force training purpose.

[ 本帖最後由 SIG 於 2006-11-22 02:54 AM 編輯 ]

Heckler & Koch USP40, 口徑 .40S&W

Heckler & Koch USP45 Expert, 口徑 .45ACP

[ 本帖最後由 SIG 於 2006-11-22 03:00 AM 編輯 ]

Heckler & Koch USP45, 口徑 .45ACP

Heckler & Koch USP45 Compact, 口徑 .45ACP

Obi-Shady兄，

小弟今日日頭先同朋友傾開呢單o野，又係一次不求甚解o既記者老作新聞！

冇錯，十幾日前已經收到通知該次招標結果由德國 JP Sauer & Sohn 公司贏得呢張CID新佩槍合約，但型號就唔係 P239 而係 P250DCc 先至岩！

個位記者哥哥淨係查到警方決定採購 SIG Sauer，又問到乜o野 model 咪想當然求其搵支 P239 話係囉！而家 d 所謂 PRESS，唉......好心啦！

另一方面，其實警方定案採用o既 P250DCc，支槍有某幾樣o野係唔乎合政府招標規格，而居然都能夠入選，其他槍械代理已經就呢件事作出投訴，好有可能最後又要重新招標都唔定！

睇睇 SIG Sauer P250DCc

[ 本帖最後由 SIG 於 2006-11-24 12:35 AM 編輯 ]

For brother aloharicnsa, see the two different guide rod for Glock pistol.

The one on top is the Hartts Recoil Reducer (for Glock17/22), it is filled with mercury and ball bearings inside. The lower one is the Tungsten guide rod (for Glock34/35), weight is double as the Hartts!

Lighting Strike Titanium striker, it broke after several thousands rounds......

Glock 17, 9X19mm

Smith & Wesson M6904, 口徑 9X19mm

Smith & Wesson M6904, 口徑 9X19mm

Smith & Wesson M6904, 口徑 9X19mm

Smith & Wesson M6904, 口徑 9X19mm

引用:

原帖由 Obi-Shady 於 2006-11-24 01:31 AM 發表


照片中所見，P250DCc好似冇撞針，係咪如Glock同樣係Single Action？另外後面個小制係咪Safety？P250DCc個Handgrip好似好肥大咁，Fit唔Fit亞洲人嫁？

The tender requirement is a "striker fire pistol", SIG P239 is definitely NO WAY!

BTW, according to Glock’s design, it is a double action pistol cause the trigger and connector completely reset and disengage after every shot.

The little button serve as slide stop/slide release purpose, SIG Sauer pistol also don’t have any external manual safety.

Grip size is close to a Glock 19, and the P250DCc is able to change with different size grip.

See the specification:-

Specifications P250 DCc
Caliber: 9 mm Para
Length, overall: 183 mm, 7.2”
Height, overall: 131 mm, 5.16”
Width, overall: 34 mm, 1.34”
Sight base: 147 mm, 5.79”
Barrel length: 98 mm, 3.86”
Length of twist: 250 mm, 9.84”
No. of grooves: 6
Weight incl. magazine: 700 g, 24.69 oz
Trigger pull weight DAO:
3,9 kp +/- 0,3 kp
8,6 lbs. +/- 0,7 lbs.
Mag. capacity: 15 rounds

引用:

原帖由 aloharicnsa 於 2006-11-25 01:24 PM 發表
HKD $6K for the 239 - which is around USD $750 - not cheap at all (specially if you are going to replace all of them, the price should be better.

On the other hand, I guess anything is better than a .38 revolver la (6 rounds and low power)...

Brother aloharicnsa,

Please forget about that BS news, the winner of the pistol tender is SIG Sauer P250DCc, NOT P239 as mentioned in the Apple Daily!

The price is US$1,527,162.00 for supplying a total of 3,900 pistols plus 7,800 magazines.
Please DO NOT ask me for the individual break down!

Somehow, some features of this pistol doesn’t match the mandatory tender requirement, and some other competitors (like H&K, Glock) are starting to make a complain to the HK Government. That could be a possibility they drop the tender and re-issue a new tender again…….. We’ll see.

Brother aloharicnsa, I found some pictures of the revolver that you are looking for, the Smith & Wesson M10 heavy barrel version.

Note, the HK Police has changed the wooden grip to rubber one in 2001, the grip is manufactured in Mainland, and the quality is NO WAY to compare to any famous grip maker like Houge, Pachmayr, not even Uncle Mike.......

Smith & Wesson M10 heavy barrel, 口徑 .38 Special

Smith & Wesson M10 heavy barrel, 口徑 .38 Special

引用:

原帖由 Rapist 於 2006-12-3 04:47 AM 發表
乜警隊唔係已經定案用 Glock 19 咩？
點解又有消息係第二款呢？有需要分
咁多種槍咩？

My post #86 on page 3 in this thread I’d already mentioned which law enforcement department and unit in Hong Kong is currently using Glock 19 pistol, so I don’t repeat here.

My post #207 on page 7, I am talking about the CID pistol tender, a sidearm to replace the old Colt Detective Special revolver.

引用:

原帖由 aloharicnsa 於 2006-11-30 03:56 PM 發表
So, HK cop can only have 2 magazines? That's not enough la...assuming they are all high cap (or regular cap) at 15/17 rounds (not sure?) - you still end up with 30 rounds or so...  

Don't worry too much pal, in HK we seldom have such big cop/bank-robber gun battle like the LA North Hollywood Shootout in 1997!

引用:

If I have a choice - I would go for the 1911 full size - talk about stopping power of the 45 (compare to 9 mm) - make me feel like a MAN - ok ok... I am not Dirty Harry here in SF with his 44 Mag

Oh come on, the HK Government even ignore the most proven .40S&W ammunition, it's NO WAY they'll adopt Mr. 45!!!

Or, perhaps they'll consider the 44 Automat like Clint Eastwood?!!!

[ 本帖最後由 SIG 於 2006-12-13 01:49 AM 編輯 ]

Glock 34, caliber 9X19mm.

Note, the pistol in the pictures is the early Gen 3 Glock, which has only a Trigger Pin, but not the Locking Block Pin.

[ 本帖最後由 SIG 於 2006-12-12 12:51 PM 編輯 ]